Zero Liquid Discharge (ZLD) means an industry recovers and reuses almost all its wastewater and discharges no liquid effluent. In India, ZLD is required or strongly encouraged for many water-intensive sectors such as textiles, distilleries, pharmaceuticals, chemicals and power. EAW Global Aqua Expo 2027 covers ZLD in its exhibition, its conference and a dedicated training day.
How a typical ZLD system works
- Pre-treatment: equalisation, chemical treatment and biological treatment remove organics and suspended solids.
- Membrane concentration: UF and RO recover most of the water as reusable permeate and concentrate the dissolved salts.
- Thermal evaporation: a Multiple Effect Evaporator (MEE) or mechanical vapour recompression (MVR) concentrates the RO reject further.
- Crystallisation and drying: crystallisers and an Agitated Thin Film Dryer (ATFD) convert the final brine into solid salt for disposal or recovery.
The real challenges
- Energy cost: thermal stages consume significant steam or power. Good design maximises membrane recovery first.
- Scaling and fouling: silica, calcium and organics can foul membranes and evaporator tubes without proper pre-treatment.
- Mixed salts: salt quality and disposal need planning from the start.
- Operations: ZLD plants need trained operators and regular monitoring to stay compliant.
Learn ZLD design at the Day 2 training
The ETP, STP & ZLD training programme covers mass balance, recovery calculations, reject management, energy optimisation and OPEX modelling, plus a troubleshooting clinic based on real plant cases.
Meet ZLD solution providers
The exhibition brings together membrane companies, evaporator and crystalliser manufacturers, EPC contractors and chemical suppliers, so you can compare complete ZLD packages in one visit.
Join the conference on 26 – 28 May 2027, or register for the training.
Frequently asked questions
What is ZLD?
Zero Liquid Discharge is a treatment approach where an industry recovers and reuses almost all its wastewater and sends no liquid effluent out of the plant.
Which equipment is used in ZLD?
Typically pre-treatment, UF and RO, a Multiple Effect Evaporator or MVR, and crystallisers or an Agitated Thin Film Dryer.
Is there ZLD training at the expo?
Yes. Day 2 is a full-day training on ETP, STP and ZLD design, calculation and troubleshooting.